Hidan, S.; Fares, G.; Abbas, Y.M.; Huseien, G.F.; Salami, B.A.; Alabduljabbar, H. Brofaromine Monoamine OxidaseBrofaromine Protocol strength and Acid Resistance of Ceramic-Based Self-Compacting Alkali-Activated Concrete: Optimizing and Predicting Assessment. Materials 2021, 14, 6208. 10.3390/ma14206208 Academic Editor: Luigi Coppola Received: 14 September 2021 Accepted: 15 October 2021 Published: 19 OctoberPublisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.Abstract: The development of self-compacting alkali-activated PK 11195 manufacturer concrete (SCAAC) has grow to be a hot topic within the scientific community; nonetheless, the majority of the current literature focuses around the utilization of fly ash (FA), ground blast furnace slag (GBFS), silica fume (SF), and rice husk ash (RHA) as the binder. In this study, both the experimental and theoretical assessments employing response surface methodology (RSM) have been taken into account to optimize and predict the optimal content of ceramic waste powder (CWP) in GBFS-based self-compacting alkali-activated concrete, thus advertising the utilization of ceramic waste in building engineering. Based on the recommended design and style array in the RSM model, experimental tests had been initial carried out to figure out the optimum CWP content to achieve reasonable compressive, tensile, and flexural strengths in the SCAAC when exposed to ambient conditions, too as to minimize its strength loss, weight loss, and UPVL upon exposure to acid attack. Based on the outcomes, the optimum content of CWP that happy both the strength and durability elements was 31 . In distinct, a reasonable reduction in the compressive strength of 16 was recorded in comparison with that in the control specimen (without having ceramic). Meanwhile, the compressive strength loss of SCAAC when exposed to acid attack minimized to 59.17 , which was reduced than that from the control specimen (74.2). Furthermore, the created RSM models have been found to become trusted and correct, with minimum errors (RMSE 1.337). Also, a powerful correlation (R 0.99, R2 0.99, adj. R2 0.98) was observed among the predicted and actual data. Furthermore, the significance from the models was also verified by way of ANOVA, in which p-values of significantly less than 0.001 and higher F-values have been recorded for all equations. Keyword phrases: mathematical assessment; optimization; self-compacting alkali-activated concrete; granulated blast furnace slag; ceramic tile waste; durability; strength; microstructureCopyright: 2021 by the authors. Licensee MDPI, Basel, Switzerland. This short article is an open access post distributed below the terms and situations of your Creative Commons Attribution (CC BY) license (licenses/by/ 4.0/).1. Introduction Owing to the speedy improvement within the building industry, concerns about air pollution and industrial waste material have increased. As such, researchers have shifted their focus to building green and sustainable concrete. As an example, ceramic waste was utilized either as a partial replacement of aggregates [1] or cement [2] inside a concrete matrix. It was identified that CWP was in a position to produce green concrete with improved mechanical properties [3].Components 2021, 14, 6208. 10.3390/mamdpi/journal/materialsMaterials 2021, 14,2 ofOn the other hand, alkali-activated concrete (AAC) has emerged as certainly one of the prime trending concrete options, especially inside the scientific community, owing to environmental considerations [4]. Free-cement-based alkali-activated concrete was developed working with waste b.